Skip to content

ACCUMULATOR MAINFOLDS

Accumulator manifold headers combine a common hydraulic source to the fluid end of multiple bladder accumulators. This dramatically reduces an accumulator circuit’s footprint, labor time and costs while eliminating leak points caused by excess fittings and hardware.

The number of accumulator ports range from two to twelve with a standard spacing of 12”. Custom accumulator port quantity and spacing options may be configured upon request. The standard material is seamless carbon steel tubing; stainless steel is also available by special request.

All manifolds are manufactured in the USA.

To receive pricing on our standard manifolds, simply call PacSeal or use our Request a Quote tool using the indicated part numbers below.

Specifications

Pressure Rating 6000 psi
Material Seamless tube AISI 1026 (stainless steel available by special request)
Bottle Ports 1-1/4 in. NPT on 12 in. centers
End Ports 2 in. NPT
Manifold Park No. No. of Ports Length Weight
40-0425 2 18 in. 48 lb.
40-0426 3 30 in. 80 lb.
40-0427 4 42 in. 112 lb.
40-0428 5 54 in. 144 lb.
40-0429 6 66 in. 176 lb.
40-0430 7 78 in. 208 lb.
40-0507 8 90 in. 240 lb.
40-0508 9 102 in. 272 lb.
40-0822 10 114 in. 304 lb.
40-0873 11 126 in. 336 lb.
40-0874 12 138 in. 368 lb.

PacSeal Hydraulics

Install Pac Seal Hydraulics

Install this application on your home screen for quick and easy access when you’re on the go.

Just tap then “Add to Home Screen”